(323) 461-4290 OR TOLL FREE AT (888) 406-8164
Shopping Cart

Sanyo XF46N

12K Lumens True XGA Digital Multimedia Projector
Back to Home
Click Picture to Enlarge (+) Sanyo XF46N

Specifications:

Brightness 12000 Lumens
Resolution XGA (1024 x 768)
Uniformity 90%
Panel System 1.8” TFT Poly x 3
Number of Pixels 2,359,296 (786,432 x 3)
Contrast Ratio (Full on / off) 1300:1
Image Size Dependent on Lens
Aspect Ratio 4:3
Projection Lamp (s) 300W UHP x 4
Scanning Frequency H 15-120k Hz / V 50-120Hz
Dot Clock 230MHz
dB Rating 51
Voltage 120V (16A Max : AC Cord 20A/125V type)
BTU Rating 5800
Power Consumption 1700W
Weight 80.5 lbs.
Dimensions (inch) 22.9 x 9.9 x 30.8
Projection Lens (inch) Lens Sold Separately
Throw Distance (feet) Dependent on Lens
Zoom / Focus Dependent on Lens
Throw Ratio Dependent on Lens
Zoom Ratio Dependent on Lens
Up / Down Ratio 10:0-0:10 (Lt / Rt 3:2 -2:3) : / dependent on lens
Power Lens Shift Up / Down / Left / Right
Optional Lenses Yes
Rear Screen Projection (L / R Reverse) Yes
Ceiling Mountable (T / B Reverse) Yes
Digital Keystone Correction V +/- 30°
Digital Zoom 49x - 1/4x
Digital Interface (HDCP Compatible) DVI-I
Analog Interface 5BNC, 2BNC, S-video D-sub 15 pin
USB Port Yes
RS-232 Control Carry and / or Yes (In / Out)
Speaker Output No
Audio Output RCA (L/R) x 1
PC Monitor Output No
PC-Less Presentation No
Wireless Presentation No
Network Control / Admin Optional
Custom Startup Screen No
Detachable Input Panels Yes
Shipping Case Optional
Remote Control Backlight Wired / IR

Day rate: $1,150.00

Loading

Overview:

The PLC-XF46N, offers outstanding improvements in both performance and reliability. The projector uses three large 1.8 inch, 1024 by 768 pixel LCDs to produce startling amounts of light on the big screen — up to 12,000 lumens — with 4 UHP lamps, each producing only 300 watts of power. If two of these relatively light weight (80.5 lbs.) tabletop projectors are stacked and aligned together — with motorized zoom, focus and shift lenses — they can produce a total of 24,000 lumens on screens up to 600 inches in diagonal size. If the XF46N is operated in the two-lamp mode, a single projector can still produce 6000 lumens with an overall lamp life of more than 4000 hours (single lamp life of 2,000 hours in normal mode or 2500 hours in a lower power “Eco mode”). With four lamps, you’ll never be left without a projected image — the XF46N can automatically switch to a long-life, low power, “Failsafe” mode whenever a single lamp defect is detected. Plus the use of low power, low cost UHP lamps results in overall running costs about half that of other systems in the same high brightness class.

The XF46N’s outstanding brightness comes with a highly impressive image quality. SANYO uses a colorful three panel LCD and optical block design in the XF46N which provides up to 1200 to 1 contrast ratio along with naturally smooth color and grey scale variations, all of which means that the XF46N can produce life-like, virtual reality images on any big screen. Of course it takes more than outstanding optics to make excellent image quality — it takes advanced image processing ICs too. The XF46N has special circuits that provide Dynamic Auto Gamma Processing. These circuits optimize the dynamic range of the luminance signals by adjusting the gamma setting and offset in real time, according to the projected image. Put that together with SANYO’s automatic circuits for Vertical and Horizontal Edge Enhancement and you get images with realistic depth and sharp detail even in areas where the image signal is shallow or would otherwise look washed out or harsh.