Telex BTR-800 UHF Dual Channel Base Station

Click Picture to Enlarge (+)

Gallery

Specifications:

System Modulation FM
Frequency Range H1 - 500-518MHz
Operating Range Up to 1000\' (Line of Sight)
Tuning 0.005%, Synthesized IFs
Power 100-240VAC, 50/60Hz, IEC Receptacle
Battery Life Not Applicable
Charging Time Not Applicable
FCC License Part 74
License Required
Transmitter
Output 100mW Max
Deviation 40kHz
Modular Distortion <1% @ Full Deviation
Receiver
Sensitivity < 0.8uV for 12dB SINAD
IF Bandwidth Not Specified by Manufacturer
Image Rejection > 70dB
Controls and Indicators Front Panel:
1 x Power Switch
2 x Menu and Set Buttons
2 x Up and Down Buttons
4 x Portable Station Enable/Disable Buttons
3 x 2-Wire, 4-Wire, Select Wired Intercom Control LED Buttons
2 x Intercom In/Out Switches
2 x Auxiliary Interface Enable LED Buttons
2 x Auxiliary In/Out Switches
1 x Headset Volume Control
1 x Headset Microphone Gain Control
1 x Talk Button
1 x Backlit LCD Display
1 x Talk/Overmod LED Indicator
4 x Portable Station Status LED Indicators
Rear Panel:
1 x Transmit Power High/Norm Switch
1 x Transmit On/Off Switch
1 x 3-way Telex, RTS, Clear-Com I/C Select Switch
Connectors Front Panel:
1 x A4M Telex
Rear Panel:
2 x Female Color-Coded TNC Transmit/Receive Connectors
2 x Male/Female 3-pin XLR 2-Wire Intercom Connectors
1 x RJ-11 Base Station Link Jack
2 x Male/Female 3-pin XLR Auxiliary Audio I/O Connectors
1 x 3-pin XLR Male Stage Announce Out
1 x IEC Power Receptacle
Antenna 2 x 1/2 Wave, TNC Connector
Dimensions 19 x 1.7 x 14\" (483 x 44 x 356mm)
Weight 7.2 lbs (3.2kg)

Day rate: $75.00

Overview:

The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base.

The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing.

This unit has a A4M Telex headset jack and works on H1 – 500-518MHz frequencies.

• Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands
• Factory selected preset frequency groups, 1000′ operating range, Transmit power level switch
• Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically
• Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability
• Simultaneous support of up to 4 beltpacks, expandable
• Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment
• Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel
• Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors
• Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity