Lectrosonics UCR100 | Action Audio and Visual

Click Picture to Enlarge (+)

Specifications

Operating frequencies: 537.6 to 608 MHz, 614 to 793.5 MHz (in 10 blocks)
Number of frequencies: 256 per block (using 26 MHz wide band)
Channel spacing: 100 kHz
Frequency control: Crystal Controlled Phase Locked Loop
Sensitivity: 1 uv (20 dB SINAD)
Signal/Noise ratio: 105 dB (system)
Squelch quieting: 90 dB
AM rejection: 50 dB, 10 uv to 100 mv
Modulation acceptance: +/-20 kHz
Spurious rejection: Greater than 70 dB
Third order intercept: 0 dBm
Frequency response: 50 Hz to 18 kHz, (±2 db)
Distortion: 1% max at 50% modulation (system)
Audio output: 0 dBv (1 Vrms) UNBALANCED into 600 ohms
Antenna: 1/4 wave vertical (fixed)
Front panel controls: Single knob controls Audio Output Level
LED Indicators: Power (red), RF (green), Level (green), Limit (red)
Power requirement: Single 9V Alkaline Battery for approximately 8 hours operation.
Power consumption: 60 ma.
Weight: 7.3 oz with battery
Size: 3.6 x 2.4 x 0.8 inches (housing only, belt clip and knob extend beyond the housing.)

Day rate: $30.00

Overview:

The Lectrosonics 100 system was designed to operate with the new generation of DV camcorders, offering an ultra-compact receiver and modest cost, yet preserving the performance that has become the hallmark of Lectrosonics.

The system offers 256 selectable frequencies over a 25.6 MHz band to avoid interference from local RF sources. The UCR100 receiver is highly sensitive and the matching transmitters provide a full 100mW of output power. The result is exceptional operating range and freedom from drop outs.

The Lectrosonics 100 System Receiver and companion transmitter are designed expressly for the most discriminating videographer and for other wireless applications needing superior audio quality, flexible operation, and
outstanding durability. The compact size of the receiver provides ease of integration with most any compact video camera.