QSC PLX3402 | Action Audio and Visual

Click Picture to Enlarge (+)

Specifications

STEREO MODE, Both Channels Driven
8 ohms (20 Hz-20 kHz 0.03% THD) 700 W
4 ohms (20 Hz-20 kHz 0.05% THD) 1100 W
2 ohms (1 kHz 1% THD) 1700 W

BRIDGE MONO MODE
16 ohms (20 Hz-20 kHz 0.1% THD) 1400 W
8 ohms (20 Hz-20 kHz 0.1% THD) 2200 W
4 ohms (1 kHz 1% THD) 3400 W
Signal to Noise (20 Hz-20 kHz) < -107 dB
Input Sensitivity @ 8 ohms 1.9 Vrms
Input Sensitivity @ 4 ohms 1.7 Vrms
Voltage Gain 40x (32 dB)
Output Circuitry 2-Step Class H
Power Requirements
(1/8 Power Pink Noise @ 4 Ohm) 12A

ALL MODELS
Distortion (SMPTE-IM) Less than 0.01%
Distortion (Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power
Less than 0.01% THD
Less than 0.01% THD
Frequency Response :20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB
Damping Factor: Greater than 500
Input Impedance: 6k ohms unbalanced, 12 k ohms balanced
Input Clipping: 10 Vrms (+22 dB)
Cooling: Variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: 3-pin XLR & 1/4\" TRS balanced
Output: Neutrik® Speakon® and touch-proof binding posts
Amplifier Protection:
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection: On/off muting, DC-fault power supply shutdown
Dimensions:
19\" (48.3 cm) rack mounting, 3.5\" (8.9 cm) tall (2 rack spaces)
13.25\" (33.7 cm) deep (from front mounting rails)
Gain: 40x (32 dB)
Weight: 21 lbs (9.5 kg) net, 27 lbs (12.3 kg) shipping

Day rate: $45.00

Overview:

A line of amplifiers that defines high impact. Up to 3,400 watts in a 2 rack-unit chassis that’s only 13″ deep and 21 lbs. We included our exclusive PowerLight® Technology used in our award-winning PowerLight Series for chest-pounding bass and crystal-clear highs. It also features hum-free noise floor and ultra-low distortion of 0.03% THD. To keep PLX running under the most demanding conditions, we’ve even added our Advanced Thermal Management System. PLXs offer the reliability of a company that’s been building professional amplifiers for over 30 years.

FEATURES:
-Exclusive PowerLight power supply for superior bass and lighter weight
-Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
-LED indicators include bridge mono and parallel input modes
-Compact 2 RU, 21 lbs. and 13″ deep chassis fits into any rack
-Class H output reduces AC power draw and heat by 40% (2402, 3002, & 3402)
-Selectable clip limiters and subsonic filters reduce distortion and protect speakers
-Variable-speed fan for low noise and solid 2 ohm performance
-Both 1/4″ TRS & XLR inputs, Speakon® and shock-proof binding post outputs